Omega Juicers
|
| |
Product |
Price |
View |
|
Omega 1000 Juicer
Free Shipping on this Item!**USA 48 States only
Get a FREE Power Juices
Book ($14 value) when you purchase this juicer!
The Omega 1000 was designed using Centrifugal Juice Extraction. This juicer's style is the most efficient and easiest to clean. It's vertical basket spins the juice out of the pulp continuously, which leaves a very dry pulp. This unit extract 20-30% more juice than most other juicers, and this is according to independent laboratory tests.
The juicing parts are comprised of surgical stainless steel, while the other parts are made from heavy-duty polycarbonate. The high quality workmanship and materials will allow this juicer to last a lifetime.
Benefits:
• Provides vitamins and minerals in their most natural form
• Ultra quiet, smooth operation
• Large juicing capacity
• Easy to use, easy to clean
• Heavy duty stainless steel construction
• UL and CSA Listed
• Extracts pure juice from fruits and vegetables.
Motor: A 1/3 Horsepower 3600-Rpm General Electric Induction Motor. The quietest motor for this style juicer. Because these are "brushless" motors, they have very few moving parts, and this makes them very dependable.
Basket: The baskets is hand balanced to achieve virtually no vibration while juicing, and it's very easy to clean.
Blade: A Stainless Steel Blade that efficiently chews up fruits and vegetable without wearing down. The blade has a plastic ring on the outer edge of its underside that has little feet, which allows the blade to float. The reasoning behind a floating blade, is so that the motor can keep it's RPM's while fruit and vegetables are being pushed down on it.
Bowl: A large Stainless Steel Bowl, easy to clean.
Spring Clutch: A Spring Clutch Nut, a small white knob, holds the blade in place allowing it to float. This nut only needs to be made finger tight, and not tools are needed to change or clean the system.
Rubber Feet: The rubber feet are variable in height, and are soft enough to give the juicer traction while not marking up your counter top.
Latch Arms: Our cantilever style Latch Arms were a first in the industry. These arms allow for easy assembly and disassembly.
Feed Chute: The feed chute is large enough to accommodate large pieces of fruits and vegetable.
Warranty: The Omega Model 1000 carries a ten- (10) year warranty
Free Shipping on this Item!**USA 48 States only
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
199.99 |
View |
|
Omega 4000 Juicer
Free Shipping on this Item!**USA 48 States only
Get a FREE Power Juices
Book ($14 value) when you purchase this juicer!
The Omega Model 4000 is one of Omega's NEW Pulp Ejector style continuous Juicer. It is manufactured in Omegas family's Southern California Factory.
The Classic Looks of the Model 4000 will look attractive in any kitchen, home or business, with a White Lustran Plastic and Surgical Stainless Steel look that will never change.
The Model 4000 is stylish, durable, dependable, efficient and very easy to clean, which explains why it's becoming the premiere "pulp ejector" style juicer in the industry. It's operation is based on several industry leading designs.
Motor: The motor is a 1/3 Horsepower 5200-Rpm American Made GS Permanent Magnet Motor, which is the most efficient motor you'll find in a juicer, which equates to less energy consumed while juicing. The motor carries a 15-year warranty.
Surgical Stainless Steel: The metal parts are all Surgical Stainless Steel, which are either polished or sandblasted for functionality and attractiveness.
Basket: The pulp ejector baskets don't need precision balancing, but it is reccommended to have it as balanced as possible. The Basket is very open so it is easy to clean, and the pulp does not stick to the basket, which normally causes the juicer to vibrate, as with cheaper imported juicers.
Blade: A 1/2 lb. Stainless Steel Blade efficiently chews fruits and vegetables and extract the maximum amount of juice from the pulp. The balde is durable and carries quite a wieght. The blade alone outweighs the blade and basket of most juicers.
Bowl: The Bowl is maed from thick, heavy duty gauge Surgical Stainless Steel, with it's outside polished to a mirror like finish. The inside is sandblasted for quick and easy clean up.
White Top: The patented helical design reduces the chances of the pulp from gathering in the chute and clogging the juicer.
Wing Nut: A plastic white wing nut holds the blade and basket assembly together. The wing nut is large enough to be tightened and loosened by hand.
Rubber Feet: The juicer stands on a dozen of evenly spaced feet. These feet vary in height, and will not leave marks on your counter while keeping the juicer in place.
Latch Arms: The cantilever style Latch Arms were a first in the industry. Thess arms allow for easy assembly and disassembly, and makes the juicer convenient for everyday use.
Feed Chute: The chute is large enough to accommodate large pieces of fruits and vegetable, and it will not slow down the motor when large items are pushed down like in the case with some juices.
Receptacle Bin: This bin will hold pounds of pulp from your fruits and vegetables, and you can also place a plastice refuse liner in the bin for easy clean up.
Warranty: The Omega Model 4000 carries a 15-year warranty.
For household & commercial use
Omega 4000 Juicer Specifications:
• Quiet 1/3 Horsepower motor
• 5200 RPM
• Balanced, Quiet, And Smooth
• 120 volts - 50/60hz - 300w - 3.8 amps
• Makes Pulp Free Juices
• Easy to Use, Easy to Clean
• Large Capacity Bowl
• Underwriters Laboratories & Canadian Standards Association Listed
• 15 Year Warranty (1 Yr On The Cutting Blade)
• 12" High x 9" wide x 14.5" Deep
• Weight: 16lbs.
Free Shipping on this Item!**USA 48 States only
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
219.99 |
View |
|
Omega 8003 Nutrition Center Juicer
Free Shipping on this Item!**USA 48 States only
Get a FREE Power Juices
Book ($14 value) when you purchase this juicer!
Omega redesigned its juicing system to simplify use for consumers. Its new 8003 Model is a streamlined White Body has a handle that fits flush against the top, while the extraction rate per pound is slightly higher.
Instruction Manual For The Omega Model 8003 Nutrition Center
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following:
Read all instructions.
To protect against risk of electrical shock, do not put the motor base in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
Avoid contact with moving parts.
DO NOT operate any appliances with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination, repair or electrical adjustment.
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
DO NOT use outdoors.
DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
DO NOT place on or near a hot gas or electric burner or in a heated oven.
DO NOT use appliance for other than intended use.
Be sure to switch to off position after each use of your juicer.
DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the plunger or another piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
DO NOT plug in until familiar with all the instructions and operating procedures.
DO NOT unplug from electrical outlet by pulling on the cord. To unplug, grasp the plug, not the cord, and pull.
Turn off all controls before unplugging from or plugging into an electrical outlet.
WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
OMEGA MODEL 8003 NUTRITION CENTER
This heavy-duty juicer features a patented, stone mill-like auger, made of hygienic U.S. FDA-approved melamine, which prevents poisonous heavy metals from mixing with your fresh juices.
The Omega 8003 Nutrition Center's low speed of 80 RPM's ensures full taste and the highest nutritional value.
The Omega 8003 Nutrition Center is easy to assemble and disassemble for quick cleaning.
The Omega 8003 Nutrition Center assures you many years of trouble-free, dependable service. Ten-year warranty on all parts and labor.
MULTI-PURPOSE JUICER/FOOD PROCESSOR
FRUIT JUICE EXTRACTOR Omega 8003 Nutrition Center efficiently juices hard and soft fruits: even citrus fruits, usually one of the hardest fruits to juice.
VEGETABLE JUICE The Omega 8003 Nutrition Center juices all kinds of vegetables including carrots, beets, celery, peppers, and radishes without destroying the natural flavor and nutritional benefits. Fresh taste and full nutrition are guaranteed with this unique extraction process.
WHEAT GRASS AND LEAFY GREENS Wheat grasses, kale, cabbage, spinach, and pine tree needles are just some of the natural products that can be juiced with the Omega 8003 Nutrition Center. Enjoy the best that nature offers in raw foods of all kinds and juice them for full nutritional benefits.
FOOD PROCESSOR The Omega 8003 Nutrition Center chops and minces, providing natural flavor and nutrition from garlic, scallions, red pepper, ginger, and most other foods, including herbs and seasonings. Soft foods for special diets for babies and geriatric patients are quick and easy to prepare with the mincing set-up.
PASTA EXTRUDER Homemade spaghetti, linguini or breadsticks can be extruded in just minutes with the included pasta nozzles.
HOMOGENIZES Make fresh frozen desserts, natural baby food and nut butters using your fresh fruit and vegetables.
GRINDER Grind coffee beans and flour.
SPECIFICATIONS:
Model Omega 8003 Nutrition Center
Height 11 1/4" (Assembled)
Width 7 inches
Weight 15 lbs.
Length 15 3/8" (Assembled)
Voltage 120V/60Hz
Motor 1/3 HP single-phase induction
Auger RPM 75 to 85
Parts:
Hopper
Drum
Auger
Juicing Screen
Blank Cone
Drum Cap
Plunger
Brush
Bowl (2)
Sieve
Nozzles
ASSEMBLY INSTRUCTIONS
For Juicing:
STEP 1 Place the auger into the drum. Insert the juicing screen into the drum with the protruding tab at the bottom. Place the drum cap onto the drum end and turn it counterclockwise until it is firmly in place.
STEP 2 Connect assembled drum set with main body by inserting the visible part of the metal shaft into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper onto the drum.
STEP 3 Place juice bowl and waste bowl under drum set. Plug power cord into wall outlet. Press the power switch down on the ON side of the switch.
For All Non-Juicing Functions:
STEP 1 Place the auger into the drum. Insert the blank into the drum with the protruding tab at the bottom. Insert the appropriate nozzle into the inside of the Drum Cap. Place the drum cap onto the drum end and turn it counterclockwise until it is firmly in place.
STEP 2 Connect assembled drum set with main body by inserting the visible part of the metal shaft into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper onto the drum.
STEP 3 Place the two bowls under the drum set. Plug the power cord into wall outlet. Press the power switch down on the ON side of the switch.
Congratulations! You are ready to use your Omega 8003 Nutrition Center. All items will be placed down the feed chute. Use the plunger to press the items into the chute. Leave the machine running while you process the items. When juicing, the juice will exit the bottom of the drum and the pulp will exit out the end of the drum cap. For all other functions, everything will exit through the end of the drum cap.
STEP 4 DO NOT place any metal objects into the hopper. DO NOT place any ice cubes into the hopper. If drum set is clogged or the machine stops operating, press the reverse button 2 to 3 times and press the ON button again to resume normal operation.
STEP 5 Switch the juicer OFF before changing or touching any moving parts. Remove the drum set from the main body by turning the locking clip counterclockwise. Remove the Drum Cap by turning clockwise and pull out the screen/blank. Pull the auger forward to disassemble it from the drum set. After each juicing session, wash all parts in warm soapy water.
All of the removable parts are dishwasher safe. Do NOT place the motor housing into the dishwasher.
Do NOT run juicer more than 30 minutes continuously at any on time.
Choosing the Correct Cones
Juicing Screen This is the cone with the stainless steel mesh. It is used for all juicing functions and only juicing functions.
Blank Cone This is the cone constructed of solid polycarbonate with a stainless steel rim on the inside. It is used for all functions except juicing. All six nozzles may be used with the blank cone.
Choosing the Correct Nozzles
Oval Nozzle
- Mincing and chopping vegetables
- Making nut butters
- Homogenizing frozen fruit, milk or yogurt
- Extruding breadsticks
Round Nozzle
- Mincing and chopping vegetables
- Making nut butters
- Homogenizing frozen fruit, milk or yogurt
- Extruding breadsticks
Four Remaining Nozzles
- Extrusion of various sized pastas.
SIEVE
The included sieve, which fits on both of the bowls, should only be needed after processing items that seem to have too much pulp in the juice or foam on the top of the juice. It is best to use the sieve at the end of the juicing process by pouring all of the prepared juice through the sieve.
FRUIT AND VEGETABLE JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
The included sieve, which fits on both of the bowls, should be needed after processing items that have more pulp or foam for your taste. It should not be used during the juicing process. It should be used at the end of the juicing process by pouring all of the prepared juice through the sieve.
While the Omega Nutrition Center can extract juice from unpeeled fruits and vegetables, we recommend you thoroughly wash and peel your fresh ingredients to remove accumulated chemicals.
Cutting fruit or vegetables into smaller pieces may help the juice be extracted more thoroughly. But, it is not necessary.
Turn on the machine and let it run without interruption until all the juice has been extracted.
When using a combination of soft and firm produce, alternate the items. It is best to start with the softer items and to finish with the firmer items.
If the pulp in the drum starts to clog or the juicer starts to vibrate slightly during operation, turn off the machine and empty the drum set. Reassemble and resume normal operation.
Do not juice anything that will change the taste in a negative way. (Example: orange rind)
Items that are traditionally thrown away for meals may be juiced. (Example: carrot or beet stems)
Soft produce will process more easily if refrigerated.
Items like ginger, lemon and beet may be added for taste. They should all be used according to your taste. Although they are listed in many of our recipes, they are optional. Make drinks that suit your personal taste or health needs.
After placing the last piece of fruit or vegetable into the hopper, keep the machine running for a few seconds longer to ensure the machine has extracted the last drops of juice.
Clean all parts that come into contact with juice after each use of the Omega 8003 Nutrition Center.
WHEAT GRASS AND GREENS JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
It is best to put smaller amounts in at a time and push them into the chute with the plunger rather that trying to force very large amounts into the chute.
Allow most of the juice to exit before pushing the next item in.
When using a small item or piece of an item for taste, insert that item during the first half of the juicing process. If inserted at the end, the full taste may not come through.
Various green drinks may be too strong for some people. If so, it is advised to add carrots or beets, which will sweeten or mask the taste of the greens so you may still enjoy its benefits and nutrients.
The included sieve fits on both of the bowls. It should only be needed when processing items that seem to have too much pulp in the juice or excessive foam on the top of the juice. The sieve should not be on any of the bowls during the juicing process. It should be used at the end of the juicing process by pouring all of the prepared juice through the sieve.
GROUND COFFEE BEANS
Cone: Blank
Nozzle: Round Hole / Oval Hole
To grind, gather needed quantity of coffee beans. Place the items in the chute at a steady pace. The items will come out finely ground. There should be no need to run the items through twice. Some coffee beans may have a higher oil content than others, especially gourmet coffee beans. These should be dried out overnight in order to process easier.
HOMOGENIZING - NUT BUTTERS, FROZEN DESSERTS, ETC.
Cone: Blank
Nozzle: Round Hole / Oval Hole
HELPFUL HINTS
Nut butters are an all-natural version of peanut butter.
Most nuts need additional oil added.
Remove all skins and shells from nuts.
Fruits can be cut into pieces and then frozen prior to juicing them.
Juice can be frozen in ice cube trays and those cubes can be put through the machine.
You may try to add milk, yogurt, syrups, or sugar to change the taste or consistency.
MINCING AND CHOPPING
Cone: Blank
Nozzle: Round Hole / Oval Hole
HELPFUL HINTS
The mincing/chopping function can be used in many "food processor" type ways.
Seed and peel any part of the fruit or vegetable that you do not want in the finished product.
Remove any fat from meat or poultry if not desired in the finished product.
Bone and scale fish before processing.
Chop or grind meat, fish, fruit, vegetables, herbs, and soaked rice and beans.
Uses include marinades, salsas, soups and sauces.
PASTA EXTRUSION
Cone: Blank
Nozzle: Desired Nozzle
HELPFUL HINTS
Water may be added if the dough becomes too dry.
Sprinkle a small amount of flour on the holding dish before making pasta. This will prevent sticking.
Sprinkle a small amount of flour on the pasta as it piles up. This will prevent sticking.
Pasta may be cut with scissors or knife to desired length.
Decide which styles of noodle you would like to make and place the appropriate nozzle on the 8003. Place the pasta in the shape of balls or tubes (slightly smaller than the opening).
A consistent motion without any gaps will give you longer noodles as the pasta exits.
The freshly made pasta should be put into boiling water. It will cook much quicker than store- bought pasta. Keep checking in order to remove the pasta at the desired consistency.
If you would like to get more creative, you can make any flavorful additions you'd like. Spinach, basil, or sun dried tomatoes may be added to the pasta dough.
Leftover vegetable juice or pulp may be mixed into dough for extra flavor.
The pasta function of the8003 is to only extrude pasta. The unit is not designed to make pasta. The following recipe can be done by hand or in a mixer.
If you would like to attempt the full process of making the pasta in the 8003, try the following: after the ingredients are mixed enough that you now have a ball of dough, run the dough through the 8003 several times to knead the dough. Do not use any nozzle when doing this.
Recipes
WHEAT GRASS AND GREEN RECIPES
Wheat grass
5 or 6 handfuls of wheat grass
Wheat grass regimens should be started slowly. This natural anti-oxidant can make people nauseous until their body gets used to it. Only an ounce or so is suggested until your body acclimates. Mixing with carrots can soften the taste.
Carrot Parsley
A "bunch" of parsley 4 or 5 carrots
Inserting the parsley first, followed by the carrots.
Wheat grass Carrot
Handful of wheat grass 5 or 6 carrots
Insert the wheat grass, followed by the carrots.
HOMOGENIZING RECIPES
Nut Butter
2 or 3 cups of nuts, Peanut oil (or other nut oil), and salt (optional/to taste)
Place small handfuls of nuts in the juicer. Allow the nuts to process before placing the next handful in the chute. Most nuts will need small amounts of oil added at times to keep the moisture level higher. Most nuts will need to be processed multiple times to gain a smoother consistency.
Banana - Banana Berry
2 or 3 bananas (peeled), 6 to 12 berries (no stems or seeds)
Place items in a zip-lock style bag. Place the items in the freezer overnight. It is helpful to cut the bananas into smaller pieces before freezing. Place the frozen pieces into the juicer. The result is an ice cream or frozen yogurt-type dessert. You may run the item through multiple times to increase creaminess.
Baby Food
Fruits and/or vegetables (cleaned, no stems, rinds or seeds)
Place fruits or vegetables into the chute. Most items should be processed twice. Most baby food should be diluted with water due to strength of straight juice. For taste or softness, some items may be cooked prior to processing.
MINCING AND CHOPPING RECIPES
Salsa
1 1/2 cups tomatoes (seeded)
¼ cup red onions (peeled)
1 tbsp. garlic
1 tbsp. jalapeno
1 to 2 tbsp. cilantro - to taste (optional)
2 limes
Salt (to taste)
Freshly ground pepper (to taste)
The two limes are needed for the juice only. You may juice them first or
squeeze them for the juice. Process the first five items while alternating.
If the mixture seems too wet, some juice may be drained. Add the limejuice. Stir. Salt and pepper to taste.
PASTA EXTRUSION RECIPES
Pasta Dough
3 cups Seminola flour (most flours may be substituted), 3 eggs, 1/8 tsp. Salt, and Water (as needed)
Place the flour on a large, flat surface. Make a bowl or well-type shape in the pile of flour to hold the other ingredients. Beat the eggs. Add the eggs and salt into the bowl of water. Use your hands or a fork to slowly incorporate the eggs into the inner layers of flour. Once the eggs become incorporated into the flour, begin kneading. Continue kneading until the dough becomes very firm.
If the dough does not feel dry enough, knead it by hand - adding semolina to the dough as you knead. Start by dusting a non-porous surface with seminola and place the dough on the dusted surface. Sprinkle some more of the semolina over the top of the dough, then knead the dough until it is smooth and very firm.
When you can set the dough on a clean countertop (without a dusting of flour underneath it) and trust that it won't stick, the dough is ready. Because of the size of the semolina grain, the dough may not be as smooth as it would be with a flour-based dough.
Wrap the pasta dough into an airtight plastic-wrapped ball. Set dough in a clean, dry area. Let it sit at room temperature for about an hour to give the gluten inside the flour a chance to relax. If the dough isn't given a chance to relax, it will be too stiff to work with and will yield tough noodles. Once your dough has had a chance to rest, unwrap it and make noodles.
OMEGA PRODUCTS, INC. Omega Juicer Model 8003 Nutrition Center
Omega Products, Inc. warrants this juicer to be free from defects of workmanship and material under normal use and service. The juicer is required to be operated solely on the electric current indicated on the unit. Damage or malfunction caused by use on other electrical current is excluded from this warranty. This warranty is limited to repair or replacements of original parts, which, in the opinion of Omega Products, Inc. are defective in workmanship or material.
Should such a defect be discovered within ten (10) years from date of purchase, Omega Products, Inc. will, upon receipt of machine, shipped prepaid, repair such defect and return the unit prepaid. This warranty does not cover breakage of any part in shipment or damage caused by misuse.
A service charge of $10.00 must accompany any unit over one (1) year old. For service, send juicer or part to:
Omega Products, Inc.
6291 Lyters Lane, PO Box 4523
Harrisburg, PA 17111
Free Shipping on this Item!**USA 48 States only
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
229.99 |
View |
|
Omega 8005 Nutrition Center
Free Shipping on this Item!**USA 48 States only
Get a FREE Power Juices
Book ($14 value) when you purchase this juicer!
Color: Black with chrome trim
Omega redesigned its juicing system to simplify use for consumers. Its new 8005 Model is a streamlined chrome-and-black body has a handle that fits flush against the top, while the extraction rate per pound is slightly higher.
Instruction Manual For The Omega Model 8005 Nutrition Center
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following:
Read all instructions.
To protect against risk of electrical shock, do not put the motor base in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
Avoid contact with moving parts.
DO NOT operate any appliances with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination, repair or electrical adjustment.
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
DO NOT use outdoors.
DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
DO NOT place on or near a hot gas or electric burner or in a heated oven.
DO NOT use appliance for other than intended use.
Be sure to switch to off position after each use of your juicer.
DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the plunger or another piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
DO NOT plug in until familiar with all the instructions and operating procedures.
DO NOT unplug from electrical outlet by pulling on the cord. To unplug, grasp the plug, not the cord, and pull.
Turn off all controls before unplugging from or plugging into an electrical outlet.
WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS.
OMEGA MODEL 8005 NUTRITION CENTER
This heavy-duty juicer features a patented, stone mill-like auger, made of hygienic U.S. FDA-approved melamine, which prevents poisonous heavy metals from mixing with your fresh juices.
The Omega 8005 Nutrition Center’s low speed of 80 RPM’s ensures full taste and the highest nutritional value.
The Omega 8005 Nutrition Center is easy to assemble and disassemble for quick cleaning.
The Omega 8005 Nutrition Center assures you many years of trouble-free, dependable service. Ten-year warranty on all parts and labor.
MULTI-PURPOSE JUICER/FOOD PROCESSOR
FRUIT JUICE EXTRACTOR Omega 8005 Nutrition Center efficiently juices hard and soft fruits: even citrus fruits, usually one of the hardest fruits to juice.
VEGETABLE JUICE The Omega 8005 Nutrition Center juices all kinds of vegetables including carrots, beets, celery, peppers, and radishes without destroying the natural flavor and nutritional benefits. Fresh taste and full nutrition are guaranteed with this unique extraction process.
WHEAT GRASS AND LEAFY GREENS Wheat grasses, kale, cabbage, spinach, and pine tree needles are just some of the natural products that can be juiced with the Omega 8005 Nutrition Center. Enjoy the best that nature offers in raw foods of all kinds and juice them for full nutritional benefits.
FOOD PROCESSOR The Omega 8005 Nutrition Center chops and minces, providing natural flavor and nutrition from garlic, scallions, red pepper, ginger, and most other foods, including herbs and seasonings. Soft foods for special diets for babies and geriatric patients are quick and easy to prepare with the mincing set-up.
PASTA EXTRUDER Homemade spaghetti, linguini or breadsticks can be extruded in just minutes with the included pasta nozzles.
HOMOGENIZES Make fresh frozen desserts, natural baby food and nut butters using your fresh fruit and vegetables.
GRINDER Grind coffee beans and flour.
SPECIFICATIONS:
Model Omega 8005 Nutrition Center
Height 11 1/4" (Assembled)
Width 7 inches
Weight 15 lbs.
Length 15 3/8" (Assembled)
Voltage 120V/60Hz
Motor 1/3 HP single-phase induction
Auger RPM 75 to 85
Parts
Hopper
Drum
Auger
Juicing Screen
Blank Cone
Drum Cap
Plunger
Brush
Bowl (2)
0 Sieve
Nozzles
ASSEMBLY INSTRUCTIONS
For Juicing
STEP 1 Place the auger into the drum. Insert the juicing screen into the drum with the protruding tab at the bottom. Place the drum cap onto the drum end and turn it counterclockwise until it is firmly in place.
STEP 2 Connect assembled drum set with main body by inserting the visible part of the metal shaft into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper onto the drum.
STEP 3 Place juice bowl and waste bowl under drum set. Plug power cord into wall outlet. Press the power switch down on the ON side of the switch.
For All Non-Juicing Functions
STEP 1 Place the auger into the drum. Insert the blank into the drum with the protruding tab at the bottom. Insert the appropriate nozzle into the inside of the Drum Cap. Place the drum cap onto the drum end and turn it counterclockwise until it is firmly in place.
STEP 2 Connect assembled drum set with main body by inserting the visible part of the metal shaft into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper onto the drum.
STEP 3 Place the two bowls under the drum set. Plug the power cord into wall outlet. Press the power switch down on the ON side of the switch.
Congratulations! You are ready to use your Omega 8005 Nutrition Center. All items will be placed down the feed chute. Use the plunger to press the items into the chute. Leave the machine running while you process the items. When juicing, the juice will exit the bottom of the drum and the pulp will exit out the end of the drum cap. For all other functions, everything will exit through the end of the drum cap.
STEP 4 DO NOT place any metal objects into the hopper. DO NOT place any ice cubes into the hopper. If drum set is clogged or the machine stops operating, press the reverse button 2 to 3 times and press the ON button again to resume normal operation.
STEP 5 Switch the juicer OFF before changing or touching any moving parts. Remove the drum set from the main body by turning the locking clip counterclockwise. Remove the Drum Cap by turning clockwise and pull out the screen/blank. Pull the auger forward to disassemble it from the drum set. After each juicing session, wash all parts in warm soapy water.
All of the removable parts are dishwasher safe. Do NOT place the motor housing into the dishwasher.
Do NOT run juicer more than 30 minutes continuously at any on time.
Choosing the Correct Cones
Juicing Screen This is the cone with the stainless steel mesh. It is used for all juicing functions and only juicing functions.
Blank Cone This is the cone constructed of solid polycarbonate with a stainless steel rim on the inside. It is used for all functions except juicing. All six nozzles may be used with the blank cone.
Choosing the Correct Nozzles
Oval Nozzle
• Mincing and chopping vegetables
• Making nut butters
• Homogenizing frozen fruit, milk or yogurt
• Extruding breadsticks
Round Nozzle
• Mincing and chopping vegetables
• Making nut butters
• Homogenizing frozen fruit, milk or yogurt
• Extruding breadsticks
Four Remaining Nozzles
• Extrusion of various sized pastas.
SIEVE
The included sieve, which fits on both of the bowls, should only be needed after processing items that seem to have too much pulp in the juice or foam on the top of the juice. It is best to use the sieve at the end of the juicing process by pouring all of the prepared juice through the sieve.
JUICING
FRUIT AND VEGETABLE JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
The included sieve, which fits on both of the bowls, should be needed after processing items that have more pulp or foam for your taste. It should not be used during the juicing process. It should be used at the end of the juicing process by pouring all of the prepared juice through the sieve.
While the Omega Nutrition Center can extract juice from unpeeled fruits and vegetables, we recommend you thoroughly wash and peel your fresh ingredients to remove accumulated chemicals.
Cutting fruit or vegetables into smaller pieces may help the juice be extracted more thoroughly. But, it is not necessary.
Turn on the machine and let it run without interruption until all the juice has been extracted.
When using a combination of soft and firm produce, alternate the items. It is best to start with the softer items and to finish with the firmer items.
If the pulp in the drum starts to clog or the juicer starts to vibrate slightly during operation, turn off the machine and empty the drum set. Reassemble and resume normal operation.
Do not juice anything that will change the taste in a negative way. (Example: orange rind)
Items that are traditionally thrown away for meals may be juiced. (Example: carrot or beet stems)
Soft produce will process more easily if refrigerated.
Items like ginger, lemon and beet may be added for taste. They should all be used according to your taste. Although they are listed in many of our recipes, they are optional. Make drinks that suit your personal taste or health needs.
After placing the last piece of fruit or vegetable into the hopper, keep the machine running for a few seconds longer to ensure the machine has extracted the last drops of juice.
Clean all parts that come into contact with juice after each use of the Omega 8005 Nutrition Center.
WHEAT GRASS AND GREENS JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
It is best to put smaller amounts in at a time and push them into the chute with the plunger rather that trying to force very large amounts into the chute.
Allow most of the juice to exit before pushing the next item in.
When using a small item or piece of an item for taste, insert that item during the first half of the juicing process. If inserted at the end, the full taste may not come through.
Various green drinks may be too strong for some people. If so, it is advised to add carrots or beets, which will sweeten or mask the taste of the greens so you may still enjoy its benefits and nutrients.
The included sieve fits on both of the bowls. It should only be needed when processing items that seem to have too much pulp in the juice or excessive foam on the top of the juice. The sieve should not be on any of the bowls during the juicing process. It should be used at the end of the juicing process by pouring all of the prepared juice through the sieve.
GROUND COFFEE BEANS
Cone: Blank
Nozzle: Round Hole / Oval Hole
To grind, gather needed quantity of coffee beans. Place the items in the chute at a steady pace. The items will come out finely ground. There should be no need to run the items through twice. Some coffee beans may have a higher oil content than others, especially gourmet coffee beans. These should be dried out overnight in order to process easier.
HOMOGENIZING - NUT BUTTERS, FROZEN DESSERTS, ETC.
Cone: Blank
Nozzle: Round Hole / Oval Hole
HELPFUL HINTS
Nut butters are an all-natural version of peanut butter.
Most nuts need additional oil added.
Remove all skins and shells from nuts.
Fruits can be cut into pieces and then frozen prior to juicing them.
Juice can be frozen in ice cube trays and those cubes can be put through the machine.
You may try to add milk, yogurt, syrups, or sugar to change the taste or consistency.
MINCING AND CHOPPING
Cone: Blank
Nozzle: Round Hole / Oval Hole
HELPFUL HINTS
The mincing/chopping function can be used in many “food processor” type ways.
Seed and peel any part of the fruit or vegetable that you do not want in the finished product.
Remove any fat from meat or poultry if not desired in the finished product.
Bone and scale fish before processing.
Chop or grind meat, fish, fruit, vegetables, herbs, and soaked rice and beans.
Uses include marinades, salsas, soups and sauces.
PASTA EXTRUSION
Cone: Blank
Nozzle: Desired Nozzle
HELPFUL HINTS
Water may be added if the dough becomes too dry.
Sprinkle a small amount of flour on the holding dish before making pasta. This will prevent sticking.
Sprinkle a small amount of flour on the pasta as it piles up. This will prevent sticking.
Pasta may be cut with scissors or knife to desired length.
Decide which styles of noodle you would like to make and place the appropriate nozzle on the 8005. Place the pasta in the shape of balls or tubes (slightly smaller than the opening).
A consistent motion without any gaps will give you longer noodles as the pasta exits.
The freshly made pasta should be put into boiling water. It will cook much quicker than store- bought pasta. Keep checking in order to remove the pasta at the desired consistency.
If you would like to get more creative, you can make any flavorful additions you’d like. Spinach, basil, or sun dried tomatoes may be added to the pasta dough.
Leftover vegetable juice or pulp may be mixed into dough for extra flavor.
The pasta function of the8005 is to only extrude pasta. The unit is not designed to make pasta. The following recipe can be done by hand or in a mixer.
If you would like to attempt the full process of making the pasta in the 8005, try the following: after the ingredients are mixed enough that you now have a ball of dough, run the dough through the 8005 several times to knead the dough. Do not use any nozzle when doing this.
Recipes
WHEAT GRASS AND GREEN RECIPES
Wheat grass
5 or 6 handfuls of wheat grass
Wheat grass regimens should be started slowly. This natural anti-oxidant can make people nauseous until their body gets used to it. Only an ounce or so is suggested until your body acclimates. Mixing with carrots can soften the taste.
Carrot Parsley
A “bunch” of parsley 4 or 5 carrots
Inserting the parsley first, followed by the carrots.
Wheat grass Carrot
Handful of wheat grass 5 or 6 carrots
Insert the wheat grass, followed by the carrots.
HOMOGENIZING RECIPES
Nut Butter
2 or 3 cups of nuts, Peanut oil (or other nut oil), and salt (optional/to taste)
Place small handfuls of nuts in the juicer. Allow the nuts to process before placing the next handful in the chute. Most nuts will need small amounts of oil added at times to keep the moisture level higher. Most nuts will need to be processed multiple times to gain a smoother consistency.
Banana - Banana Berry
2 or 3 bananas (peeled), 6 to 12 berries (no stems or seeds)
Place items in a zip-lock style bag. Place the items in the freezer overnight. It is helpful to cut the bananas into smaller pieces before freezing. Place the frozen pieces into the juicer. The result is an ice cream or frozen yogurt-type dessert. You may run the item through multiple times to increase creaminess.
Baby Food
Fruits and/or vegetables (cleaned, no stems, rinds or seeds)
Place fruits or vegetables into the chute. Most items should be processed twice. Most baby food should be diluted with water due to strength of straight juice. For taste or softness, some items may be cooked prior to processing.
MINCING AND CHOPPING RECIPES
Salsa
1 1/2 cups tomatoes (seeded)
¼ cup red onions (peeled)
1 tbsp. garlic
1 tbsp. jalapeno
1 to 2 tbsp. cilantro – to taste (optional)
2 limes
Salt (to taste)
Freshly ground pepper (to taste)
The two limes are needed for the juice only. You may juice them first or
squeeze them for the juice. Process the first five items while alternating.
If the mixture seems too wet, some juice may be drained. Add the limejuice. Stir. Salt and pepper to taste.
PASTA EXTRUSION RECIPES
Pasta Dough
3 cups Seminola flour (most flours may be substituted), 3 eggs, 1/8 tsp. Salt, and Water (as needed)
Place the flour on a large, flat surface. Make a bowl or well-type shape in the pile of flour to hold the other ingredients. Beat the eggs. Add the eggs and salt into the bowl of water. Use your hands or a fork to slowly incorporate the eggs into the inner layers of flour. Once the eggs become incorporated into the flour, begin kneading. Continue kneading until the dough becomes very firm.
If the dough does not feel dry enough, knead it by hand – adding semolina to the dough as you knead. Start by dusting a non-porous surface with seminola and place the dough on the dusted surface. Sprinkle some more of the semolina over the top of the dough, then knead the dough until it is smooth and very firm.
When you can set the dough on a clean countertop (without a dusting of flour underneath it) and trust that it won’t stick, the dough is ready. Because of the size of the semolina grain, the dough may not be as smooth as it would be with a flour-based dough.
Wrap the pasta dough into an airtight plastic-wrapped ball. Set dough in a clean, dry area. Let it sit at room temperature for about an hour to give the gluten inside the flour a chance to relax. If the dough isn’t given a chance to relax, it will be too stiff to work with and will yield tough noodles. Once your dough has had a chance to rest, unwrap it and make noodles.
OMEGA PRODUCTS, INC.
Omega Juicer Model 8005 Nutrition Center
Omega Products, Inc. warrants this juicer to be free from defects of workmanship and material under normal use and service. The juicer is required to be operated solely on the electric current indicated on the unit. Damage or malfunction caused by use on other electrical current is excluded from this warranty. This warranty is limited to repair or replacements of original parts, which, in the opinion of Omega Products, Inc. are defective in workmanship or material.
Should such a defect be discovered within ten (10) years from date of purchase, Omega Products, Inc. will, upon receipt of machine, shipped prepaid, repair such defect and return the unit prepaid. This warranty does not cover breakage of any part in shipment or damage caused by misuse.
A service charge of $10.00 must accompany any unit over one (1) year old. For service, send juicer or part to:
Omega Products, Inc.
6291 Lyters Lane, PO Box 4523
Harrisburg, PA 17111 |
259.99 |
View |
|
|
Omega 1000 Juicer - 220volt
Free Shipping on this Item!**USA 48 States only
Get a FREE Power Juices
Book ($14 value) when you purchase this juicer!
The Omega 1000 was designed using Centrifugal Juice Extraction. This juicer's style is the most efficient and easiest to clean. It's vertical basket spins the juice out of the pulp continuously, which leaves a very dry pulp. This unit extract 20-30% more juice than most other juicers, and this is according to independent laboratory tests.
The juicing parts are comprised of surgical stainless steel, while the other parts are made from heavy-duty polycarbonate. The high quality workmanship and materials will allow this juicer to last a lifetime.
Benefits:
• Provides vitamins and minerals in their most natural form
• Ultra quiet, smooth operation
• Large juicing capacity
• Easy to use, easy to clean
• Heavy duty stainless steel construction
• UL and CSA Listed
• Extracts pure juice from fruits and vegetables.
Motor: A 1/3 Horsepower 3600-Rpm General Electric Induction Motor. The quietest motor for this style juicer. Because these are "brushless" motors, they have very few moving parts, and this makes them very dependable.
Basket: The baskets is hand balanced to achieve virtually no vibration while juicing, and it's very easy to clean.
Blade: A Stainless Steel Blade that efficiently chews up fruits and vegetable without wearing down. The blade has a plastic ring on the outer edge of its underside that has little feet, which allows the blade to float. The reasoning behind a floating blade, is so that the motor can keep it's RPM's while fruit and vegetables are being pushed down on it.
Bowl: A large Stainless Steel Bowl, easy to clean.
Spring Clutch: A Spring Clutch Nut, a small white knob, holds the blade in place allowing it to float. This nut only needs to be made finger tight, and not tools are needed to change or clean the system.
Rubber Feet: The rubber feet are variable in height, and are soft enough to give the juicer traction while not marking up your counter top.
Latch Arms: Our cantilever style Latch Arms were a first in the industry. These arms allow for easy assembly and disassembly.
Feed Chute: The feed chute is large enough to accommodate large pieces of fruits and vegetable.
Warranty: The Omega Model 1000 carries a ten- (10) year warranty
Free Shipping on this Item!**USA 48 States only
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
209.00 |
View |
|
|
Omega 4000 Juicer - 220volt
Free Shipping on this Item!**USA 48 States only
Get a FREE Power Juices
Book ($14 value) when you purchase this juicer!
The Omega Model 4000 is one of Omega's NEW Pulp Ejector style continuous Juicer. It is manufactured in Omegas family's Southern California Factory.
The Classic Looks of the Model 4000 will look attractive in any kitchen, home or business, with a White Lustran Plastic and Surgical Stainless Steel look that will never change.
The Model 4000 is stylish, durable, dependable, efficient and very easy to clean, which explains why it's becoming the premiere "pulp ejector" style juicer in the industry. It's operation is based on several industry leading designs.
Motor: The motor is a 1/3 Horsepower 5200-Rpm American Made GS Permanent Magnet Motor, which is the most efficient motor you'll find in a juicer, which equates to less energy consumed while juicing. The motor carries a 15-year warranty.
Surgical Stainless Steel: The metal parts are all Surgical Stainless Steel, which are either polished or sandblasted for functionality and attractiveness.
Basket: The pulp ejector baskets don't need precision balancing, but it is reccommended to have it as balanced as possible. The Basket is very open so it is easy to clean, and the pulp does not stick to the basket, which normally causes the juicer to vibrate, as with cheaper imported juicers.
Blade: A 1/2 lb. Stainless Steel Blade efficiently chews fruits and vegetables and extract the maximum amount of juice from the pulp. The balde is durable and carries quite a wieght. The blade alone outweighs the blade and basket of most juicers.
Bowl: The Bowl is maed from thick, heavy duty gauge Surgical Stainless Steel, with it's outside polished to a mirror like finish. The inside is sandblasted for quick and easy clean up.
White Top: The patented helical design reduces the chances of the pulp from gathering in the chute and clogging the juicer.
Wing Nut: A plastic white wing nut holds the blade and basket assembly together. The wing nut is large enough to be tightened and loosened by hand.
Rubber Feet: The juicer stands on a dozen of evenly spaced feet. These feet vary in height, and will not leave marks on your counter while keeping the juicer in place.
Latch Arms: The cantilever style Latch Arms were a first in the industry. Thess arms allow for easy assembly and disassembly, and makes the juicer convenient for everyday use.
Feed Chute: The chute is large enough to accommodate large pieces of fruits and vegetable, and it will not slow down the motor when large items are pushed down like in the case with some juices.
Receptacle Bin: This bin will hold pounds of pulp from your fruits and vegetables, and you can also place a plastice refuse liner in the bin for easy clean up.
Warranty: The Omega Model 4000 carries a 15-year warranty.
For household & commercial use
Omega 4000 Juicer Specifications:
• Quiet 1/3 Horsepower motor
• 5200 RPM
• Balanced, Quiet, And Smooth
• 120 volts - 50/60hz - 300w - 3.8 amps
• Makes Pulp Free Juices
• Easy to Use, Easy to Clean
• Large Capacity Bowl
• Underwriters Laboratories & Canadian Standards Association Listed
• 15 Year Warranty (1 Yr On The Cutting Blade)
• 12" High x 9" wide x 14.5" Deep
• Weight: 16lbs.
Free Shipping on this Item!**USA 48 States only
Remember to select the Shipping option 'Free Shipping' in the checkout area or you will not receive Free Shipping for this product. |
259.00 |
View |
|
|
Omega 8005 Nutrition Center - 220volt
Samson 6 in 1
Solostar II
Free Shipping on this Item!**USA 48 States only
Color: Black with chrome trim
Omega redesigned its juicing system to simplify use for consumers. Its new 8005 Model is a streamlined chrome-and-black body has a handle that fits flush against the top, while the extraction rate per pound is slightly higher.
Instruction Manual For The Omega Model 8005 Nutrition Center
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following:
Read all instructions.
To protect against risk of electrical shock, do not put the motor base in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
Avoid contact with moving parts.
DO NOT operate any appliances with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination, repair or electrical adjustment.
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
DO NOT use outdoors.
DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
DO NOT place on or near a hot gas or electric burner or in a heated oven.
DO NOT use appliance for other than intended use.
Be sure to switch to off position after each use of your juicer.
DO NOT put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the plunger or another piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
DO NOT plug in until familiar with all the instructions and operating procedures.
DO NOT unplug from electrical outlet by pulling on the cord. To unplug, grasp the plug, not the cord, and pull.
Turn off all controls before unplugging from or plugging into an electrical outlet.
WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS.
OMEGA MODEL 8005 NUTRITION CENTER
This heavy-duty juicer features a patented, stone mill-like auger, made of hygienic U.S. FDA-approved melamine, which prevents poisonous heavy metals from mixing with your fresh juices.
The Omega 8005 Nutrition Center’s low speed of 80 RPM’s ensures full taste and the highest nutritional value.
The Omega 8005 Nutrition Center is easy to assemble and disassemble for quick cleaning.
The Omega 8005 Nutrition Center assures you many years of trouble-free, dependable service. Ten-year warranty on all parts and labor.
MULTI-PURPOSE JUICER/FOOD PROCESSOR
FRUIT JUICE EXTRACTOR Omega 8005 Nutrition Center efficiently juices hard and soft fruits: even citrus fruits, usually one of the hardest fruits to juice.
VEGETABLE JUICE The Omega 8005 Nutrition Center juices all kinds of vegetables including carrots, beets, celery, peppers, and radishes without destroying the natural flavor and nutritional benefits. Fresh taste and full nutrition are guaranteed with this unique extraction process.
WHEAT GRASS AND LEAFY GREENS Wheat grasses, kale, cabbage, spinach, and pine tree needles are just some of the natural products that can be juiced with the Omega 8005 Nutrition Center. Enjoy the best that nature offers in raw foods of all kinds and juice them for full nutritional benefits.
FOOD PROCESSOR The Omega 8005 Nutrition Center chops and minces, providing natural flavor and nutrition from garlic, scallions, red pepper, ginger, and most other foods, including herbs and seasonings. Soft foods for special diets for babies and geriatric patients are quick and easy to prepare with the mincing set-up.
PASTA EXTRUDER Homemade spaghetti, linguini or breadsticks can be extruded in just minutes with the included pasta nozzles.
HOMOGENIZES Make fresh frozen desserts, natural baby food and nut butters using your fresh fruit and vegetables.
GRINDER Grind coffee beans and flour.
SPECIFICATIONS:
Model Omega 8005 Nutrition Center
Height 11 1/4" (Assembled)
Width 7 inches
Weight 15 lbs.
Length 15 3/8" (Assembled)
Voltage 120V/60Hz
Motor 1/3 HP single-phase induction
Auger RPM 75 to 85
Parts
Hopper
Drum
Auger
Juicing Screen
Blank Cone
Drum Cap
Plunger
Brush
Bowl (2)
0 Sieve
Nozzles
ASSEMBLY INSTRUCTIONS
For Juicing
STEP 1 Place the auger into the drum. Insert the juicing screen into the drum with the protruding tab at the bottom. Place the drum cap onto the drum end and turn it counterclockwise until it is firmly in place.
STEP 2 Connect assembled drum set with main body by inserting the visible part of the metal shaft into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper onto the drum.
STEP 3 Place juice bowl and waste bowl under drum set. Plug power cord into wall outlet. Press the power switch down on the ON side of the switch.
For All Non-Juicing Functions
STEP 1 Place the auger into the drum. Insert the blank into the drum with the protruding tab at the bottom. Insert the appropriate nozzle into the inside of the Drum Cap. Place the drum cap onto the drum end and turn it counterclockwise until it is firmly in place.
STEP 2 Connect assembled drum set with main body by inserting the visible part of the metal shaft into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper onto the drum.
STEP 3 Place the two bowls under the drum set. Plug the power cord into wall outlet. Press the power switch down on the ON side of the switch.
Congratulations! You are ready to use your Omega 8005 Nutrition Center. All items will be placed down the feed chute. Use the plunger to press the items into the chute. Leave the machine running while you process the items. When juicing, the juice will exit the bottom of the drum and the pulp will exit out the end of the drum cap. For all other functions, everything will exit through the end of the drum cap.
STEP 4 DO NOT place any metal objects into the hopper. DO NOT place any ice cubes into the hopper. If drum set is clogged or the machine stops operating, press the reverse button 2 to 3 times and press the ON button again to resume normal operation.
STEP 5 Switch the juicer OFF before changing or touching any moving parts. Remove the drum set from the main body by turning the locking clip counterclockwise. Remove the Drum Cap by turning clockwise and pull out the screen/blank. Pull the auger forward to disassemble it from the drum set. After each juicing session, wash all parts in warm soapy water.
All of the removable parts are dishwasher safe. Do NOT place the motor housing into the dishwasher.
Do NOT run juicer more than 30 minutes continuously at any on time.
Choosing the Correct Cones
Juicing Screen This is the cone with the stainless steel mesh. It is used for all juicing functions and only juicing functions.
Blank Cone This is the cone constructed of solid polycarbonate with a stainless steel rim on the inside. It is used for all functions except juicing. All six nozzles may be used with the blank cone.
Choosing the Correct Nozzles
Oval Nozzle
• Mincing and chopping vegetables
• Making nut butters
• Homogenizing frozen fruit, milk or yogurt
• Extruding breadsticks
Round Nozzle
• Mincing and chopping vegetables
• Making nut butters
• Homogenizing frozen fruit, milk or yogurt
• Extruding breadsticks
Four Remaining Nozzles
• Extrusion of various sized pastas.
SIEVE
The included sieve, which fits on both of the bowls, should only be needed after processing items that seem to have too much pulp in the juice or foam on the top of the juice. It is best to use the sieve at the end of the juicing process by pouring all of the prepared juice through the sieve.
JUICING
FRUIT AND VEGETABLE JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
The included sieve, which fits on both of the bowls, should be needed after processing items that have more pulp or foam for your taste. It should not be used during the juicing process. It should be used at the end of the juicing process by pouring all of the prepared juice through the sieve.
While the Omega Nutrition Center can extract juice from unpeeled fruits and vegetables, we recommend you thoroughly wash and peel your fresh ingredients to remove accumulated chemicals.
Cutting fruit or vegetables into smaller pieces may help the juice be extracted more thoroughly. But, it is not necessary.
Turn on the machine and let it run without interruption until all the juice has been extracted.
When using a combination of soft and firm produce, alternate the items. It is best to start with the softer items and to finish with the firmer items.
If the pulp in the drum starts to clog or the juicer starts to vibrate slightly during operation, turn off the machine and empty the drum set. Reassemble and resume normal operation.
Do not juice anything that will change the taste in a negative way. (Example: orange rind)
Items that are traditionally thrown away for meals may be juiced. (Example: carrot or beet stems)
Soft produce will process more easily if refrigerated.
Items like ginger, lemon and beet may be added for taste. They should all be used according to your taste. Although they are listed in many of our recipes, they are optional. Make drinks that suit your personal taste or health needs.
After placing the last piece of fruit or vegetable into the hopper, keep the machine running for a few seconds longer to ensure the machine has extracted the last drops of juice.
Clean all parts that come into contact with juice after each use of the Omega 8005 Nutrition Center.
WHEAT GRASS AND GREENS JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
It is best to put smaller amounts in at a time and push them into the chute with the plunger rather that trying to force very large amounts into the chute.
Allow most of the juice to exit before pushing the next item in.
When using a small item or piece of an item for taste, insert that item during the first half of the juicing process. If inserted at the end, the full taste may not come through.
Various green drinks may be too strong for some people. If so, it is advised to add carrots or beets, which will sweeten or mask the taste of the greens so you may still enjoy its benefits and nutrients.
The included sieve fits on both of the bowls. It should only be needed when processing items that seem to have too much pulp in the juice or excessive foam on the top of the juice. The sieve should not be on any of the bowls during the juicing process. It should be used at the end of the juicing process by pouring all of the prepared juice through the sieve.
GROUND COFFEE BEANS
Cone: Blank
Nozzle: Round Hole / Oval Hole
To grind, gather needed quantity of coffee beans. Place the items in the chute at a steady pace. The items will come out finely ground. There should be no need to run the items through twice. Some coffee beans may have a higher oil content than others, especially gourmet coffee beans. These should be dried out overnight in order to process easier.
HOMOGENIZING - NUT BUTTERS, FROZEN DESSERTS, ETC.
Cone: Blank
Nozzle: Round Hole / Oval Hole
HELPFUL HINTS
Nut butters are an all-natural version of peanut butter.
Most nuts need additional oil added.
Remove all skins and shells from nuts.
Fruits can be cut into pieces and then frozen prior to juicing them.
Juice can be frozen in ice cube trays and those cubes can be put through the machine.
You may try to add milk, yogurt, syrups, or sugar to change the taste or consistency.
MINCING AND CHOPPING
Cone: Blank
Nozzle: Round Hole / Oval Hole
HELPFUL HINTS
The mincing/chopping function can be used in many “food processor” type ways.
Seed and peel any part of the fruit or vegetable that you do not want in the finished product.
Remove any fat from meat or poultry if not desired in the finished product.
Bone and scale fish before processing.
Chop or grind meat, fish, fruit, vegetables, herbs, and soaked rice and beans.
Uses include marinades, salsas, soups and sauces.
PASTA EXTRUSION
Cone: Blank
Nozzle: Desired Nozzle
HELPFUL HINTS
Water may be added if the dough becomes too dry.
Sprinkle a small amount of flour on the holding dish before making pasta. This will prevent sticking.
Sprinkle a small amount of flour on the pasta as it piles up. This will prevent sticking.
Pasta may be cut with scissors or knife to desired length.
Decide which styles of noodle you would like to make and place the appropriate nozzle on the 8005. Place the pasta in the shape of balls or tubes (slightly smaller than the opening).
A consistent motion without any gaps will give you longer noodles as the pasta exits.
The freshly made pasta should be put into boiling water. It will cook much quicker than store- bought pasta. Keep checking in order to remove the pasta at the desired consistency.
If you would like to get more creative, you can make any flavorful additions you’d like. Spinach, basil, or sun dried tomatoes may be added to the pasta dough.
Leftover vegetable juice or pulp may be mixed into dough for extra flavor.
The pasta function of the8005 is to only extrude pasta. The unit is not designed to make pasta. The following recipe can be done by hand or in a mixer.
If you would like to attempt the full process of making the pasta in the 8005, try the following: after the ingredients are mixed enough that you now have a ball of dough, run the dough through the 8005 several times to knead the dough. Do not use any nozzle when doing this.
Recipes
WHEAT GRASS AND GREEN RECIPES
Wheat grass
5 or 6 handfuls of wheat grass
Wheat grass regimens should be started slowly. This natural anti-oxidant can make people nauseous until their body gets used to it. Only an ounce or so is suggested until your body acclimates. Mixing with carrots can soften the taste.
Carrot Parsley
A “bunch” of parsley 4 or 5 carrots
Inserting the parsley first, followed by the carrots.
Wheat grass Carrot
Handful of wheat grass 5 or 6 carrots
Insert the wheat grass, followed by the carrots.
HOMOGENIZING RECIPES
Nut Butter
2 or 3 cups of nuts, Peanut oil (or other nut oil), and salt (optional/to taste)
Place small handfuls of nuts in the juicer. Allow the nuts to process before placing the next handful in the chute. Most nuts will need small amounts of oil added at times to keep the moisture level higher. Most nuts will need to be processed multiple times to gain a smoother consistency.
Banana - Banana Berry
2 or 3 bananas (peeled), 6 to 12 berries (no stems or seeds)
Place items in a zip-lock style bag. Place the items in the freezer overnight. It is helpful to cut the bananas into smaller pieces before freezing. Place the frozen pieces into the juicer. The result is an ice cream or frozen yogurt-type dessert. You may run the item through multiple times to increase creaminess.
Baby Food
Fruits and/or vegetables (cleaned, no stems, rinds or seeds)
Place fruits or vegetables into the chute. Most items should be processed twice. Most baby food should be diluted with water due to strength of straight juice. For taste or softness, some items may be cooked prior to processing.
MINCING AND CHOPPING RECIPES
Salsa
1 1/2 cups tomatoes (seeded)
¼ cup red onions (peeled)
1 tbsp. garlic
1 tbsp. jalapeno
1 to 2 tbsp. cilantro – to taste (optional)
2 limes
Salt (to taste)
Freshly ground pepper (to taste)
The two limes are needed for the juice only. You may juice them first or
squeeze them for the juice. Process the first five items while alternating.
If the mixture seems too wet, some juice may be drained. Add the limejuice. Stir. Salt and pepper to taste.
PASTA EXTRUSION RECIPES
Pasta Dough
3 cups Seminola flour (most flours may be substituted), 3 eggs, 1/8 tsp. Salt, and Water (as needed)
Place the flour on a large, flat surface. Make a bowl or well-type shape in the pile of flour to hold the other ingredients. Beat the eggs. Add the eggs and salt into the bowl of water. Use your hands or a fork to slowly incorporate the eggs into the inner layers of flour. Once the eggs become incorporated into the flour, begin kneading. Continue kneading until the dough becomes very firm.
If the dough does not feel dry enough, knead it by hand – adding semolina to the dough as you knead. Start by dusting a non-porous surface with seminola and place the dough on the dusted surface. Sprinkle some more of the semolina over the top of the dough, then knead the dough until it is smooth and very firm.
When you can set the dough on a clean countertop (without a dusting of flour underneath it) and trust that it won’t stick, the dough is ready. Because of the size of the semolina grain, the dough may not be as smooth as it would be with a flour-based dough.
Wrap the pasta dough into an airtight plastic-wrapped ball. Set dough in a clean, dry area. Let it sit at room temperature for about an hour to give the gluten inside the flour a chance to relax. If the dough isn’t given a chance to relax, it will be too stiff to work with and will yield tough noodles. Once your dough has had a chance to rest, unwrap it and make noodles.
OMEGA PRODUCTS, INC.
Omega Juicer Model 8005 Nutrition Center
Omega Products, Inc. warrants this juicer to be free from defects of workmanship and material under normal use and service. The juicer is required to be operated solely on the electric current indicated on the unit. Damage or malfunction caused by use on other electrical current is excluded from this warranty. This warranty is limited to repair or replacements of original parts, which, in the opinion of Omega Products, Inc. are defective in workmanship or material.
Should such a defect be discovered within ten (10) years from date of purchase, Omega Products, Inc. will, upon receipt of machine, shipped prepaid, repair such defect and return the unit prepaid. This warranty does not cover breakage of any part in shipment or damage caused by misuse.
A service charge of $10.00 must accompany any unit over one (1) year old. For service, send juicer or part to:
Omega Products, Inc.
6291 Lyters Lane, PO Box 4523
Harrisburg, PA 17111 |
259.00 |
View |
|
|
|
|
